Description
Characteristics
SURFACE FINISHING & PLASTERBOARD JOINTING:
Ready to use on interior surfaces for plasterboard jointing and surface finishing and can be applied manually or with an airless spray machine. Easy to sand and apply with minimal shrinkage. Conforms to BS EN 13963 for jointing applications.
The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm.
Ready to use on interior surfaces for plasterboard jointing and surface finishing and can be applied manually or with an airless spray machine. Easy to sand and apply with minimal shrinkage. Conforms to BS EN 13963 for jointing applications.
The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm.
Code
FGBJP20GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Jointing plasterboard
Skimming plasterboard
Jointing plasterboard
Skimming plasterboard
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Overcoat with
Any type of filler, paint or wall coating.
Maximum recommended application thickness
Up to 5 mm.
Mixing rate
Ready to Use
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife
Blade
Trowel
Blade
Trowel
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1700.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water
Pack sizes
- Bucket 10 KG
- Bucket 20 KG
